Introduction
Cabinets are a great storage option for your kitchen, but they can sometimes be a bit of a pain to open. Cabinet drawer slides need lubrication from time to time; otherwise they can stick or even break completely. It's easy enough to do, so let's get started!
Lubricate Your Cabinet Drawer Slides to Keep Them Gliding Smoothly
To Lubricate Cabinet Drawer Slides, use silicone spray. Don't use oil, Vaseline, graphite or beeswax.
Silicone spray is safe for all types of cabinets and can be purchased at any hardware store or home improvement center. It's also easy to apply just read the directions on the can and spray away!
Wipe out the drawer with a soft, dry cloth.
Wipe out the drawer with a soft, dry cloth. Don't use a wet cloth or paper towel because these can cause damage to the drawer's surface. An abrasive cloth may scratch or harm the wood or metal of your drawers, so avoid those as well.
Apply the silicone spray to the slides.
The last step is to apply the silicone spray to the slides. You can use a towel to wipe off excess lube, but be sure not to use any paper towels as they’re too abrasive and will scratch the finish on your drawers.
Remove excess lube and wipe off any oil on the slides.
Use a lint-free cloth, paper towel or cotton swab to remove excess oil. If you're having trouble getting the oil off of your drawers, try using a cotton ball or even a paper towel with some baby powder. Just make sure that you wipe it all off so the slide doesn't get stuck again!
Conclusion
It’s a good idea to lubricate your drawer slides every so often, especially if they haven’t been used in a while. This way, they will continue to slide smoothly and easily.
Comments
Post a Comment